Waterproof Agent in Pakistan

Waterproof Agent in Pakistan, Clean the surface of dirt, dust, grease, and oil. Could you make sure the surface is dried completely?

Stir the contents for 30 seconds until it is thoroughly mixed.

Apply to the surface by brush, roll, trowel, dip, or pour. Ensure the surface is completely covered.

Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.

NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4″. Apply between 50F and 120F.

PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting.

CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.